|
dbx DriveRack PA+ Complete Loudspeaker Management System
The best just got even better! The DriveRack PA, far and away the world's most popular loud speaker management system has now become the DriveRack PA+; the best has indeed gotten better. Showcasing all the features that users around the world have come to expect, including easy setup, rock-solid reliability and unparalleled sound quality, the new version has gone to great lengths to earn its "plus." With more settings, more control and enhanced circuitry, the sound you seek is right at your fingertips.
Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use. The dbx exclusive Set Up Wizards walk you through system set up with easy to follow step-by-step instructions. Just pick your speakers and amps from the built-in list on the DriveRack PA+ and then let the Auto Level Wizard fine tune the level settings of each speaker. You can then let the Auto EQ® Wizard help you further optimize your sound.
Finish up by using the AFS Wizard, which automatically sets filters to eliminate any feedback during performances. Within minutes, your system will sound like it was tuned by a pro!
dbx DriveRack PA+ Features:
Setup Wizard Steps Through Speaker and Amp Selection and Levels
Auto EQ Wizard with 28-Band RTA Tunes Your System For The Venue
AFS Wizard Helps Eliminate Feedback
Stereo Feedback Elimination with 12 feedback notch filters
dbx 120A Sub-harmonic Synthesizer
Classic dbx Input Compression
JBL® Speaker and Crown® Power Amp Tunings included
USB Firmware and Speaker Tunings Field Updatable With Harman HiQnet System
Architect
Full time RTA function
Front-Panel Output Mutes
Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
Linked Stereo DSP Processing for ease of use
24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
2-Channel XLR Input and 6-Channel XLR Output
2x3, 2x4, 2x5, 2x6 Crossover Configurations
Dual 28-band Graphic EQ- Linked or Dual Mono
Stereo Multi-band Parametric EQ
Stereo Output Limiters
Output Alignment Delay
Power on/off Mute Circuitry
Front-panel RTA-M XLR input with phantom power
25 User Programs/25 Factory Programs
Full Graphic LCD Display
Front Panel Input and Output Meters
dbx DriveRack PA+ Specifications:
|
Frequency Response |
20Hz - 20kHz, +/- 0.5dB |
|
Dynamic Range |
A/D:
110dB A-weighted, 107dB unweighted
Type IV:
123dB with transient material, unweighted, 22kHz BW
121dB with transient material, unweighted, 22kHz BW
115dB typical with program material, A-weighted, 22kHz BW
D/A:
112dB A-weighted, 110dB unweighted
System: 110dB A-weighted, >107dB unweighted
Note: Figures above based on 48kHz sampling rate |
|
Input Connections |
2 x 3-pin XLR Female, Line
1 x XLR RTA Microphone |
|
Output Connections |
6 x XLR Male, Line |
|
Input Impedance |
>40k ohms |
|
Output Impedance |
120 ohms |
|
Maximum Input Level |
+20dBu (Line) |
|
Maximum Output Level |
+20dBu |
|
Sample Rate |
48kHz |
|
RTA Mic Phantom Voltage |
+15VDC |
|
Crosstalk (Main Outputs) |
Interchannel: >110dB min, 120dB typical
Input to Output: >+100dB |
|
THD & Noise |
0.002% typical at +4dBu, 1kHz, 0dB input gain |
|
Dimensions |
19 x 5.75 x 1.75" (482.6 x 146.05 x 44.45mm) |
|
Weight |
5.5 lb (2.5 kg) | |
